IES Syllabus Civil Pdf Download |
In this article we
are sharing with you the IES Syllabus 2023 for the Civil
Engineering (CE) branch. If you want to pass the IES Exam 2023,
then you have to prepare according to the IES Civil Syllabus 2023.
The IES exam is conducted in three stages: Stage-I: Engineering Services
(Preliminary/ Stage-I) Examination (Objective Type Papers), Stage-I:
Engineering Services (Preliminary / Stage-I) Examination (Objective Type
Papers), Stage-II: Engineering Services (Main/Phase-II) Examination (Conventional Type Papers) and Stage-III: Personality Test. Below
we are providing you with the IES Syllabus for Civil Engineering (CE), whose
PDF you can also download.
IES Latest News:
·
IES
Notification 2023: Check Exam Dates, Admit Card, Result
The UPSC Engineering Services Examination exam is conducted every year at the national level. The Union Public Service Commission (UPSC) has announced the notification of Engineering Services Examination 2023 for Civil, Mechanical, Electrical, Electronics, and Telecommunication Engineering categories.
(toc)
IES Syllabus & Exams Pattern for Civil Engineering 2023
UPSC Engineering
Services examination is conducted in three stages. The Stage-I: (Preliminary/Phase-I)
Examination (Objective Type Paper) is of 500 marks. Stage-II: Engineering
Services (Main/Phase-II) Examination (Conventional Type
Papers) is worth 600 marks. The Stage-III: Personality Test is worth 200 marks.
We are sharing with you the IES Exam Syllabus and Exam Pattern for the Civil
Engineering Branch.
Exam Stages |
Marks |
Stage-1
(Preliminary) |
500 |
Stage-2 (Mains) |
600 |
Stage- 3
(Personality Test Interview) |
200 |
Total [Stage-1 +
Stage-2 + Stage-3] |
1300 |
IES 2023 Study
Material:
·
IES
2023 Exam Pattern, Syllabus, Best Books, Previous Papers, Notes Download
IES Exam Civil Pattern Stage-1: (Preliminary/Phase-1)
Preliminary Examination has
consisted with two papers (Paper-1 &
Paper-2). The Engineering Services
(Preliminary/Phase-I) exam will consist of two objective type (multiple choice)
question papers and carry a maximum of 500 marks (Paper 1 - 200 marks
and Paper II - 300 marks). If you qualify the Preliminary/Phase-I
Examination, then you will be eligible for the Main/Phase-II Examination. The
number of candidates appearing in the Main/Phase-II examination will be
approximately six to seven times the total estimated number of vacancies to be
filled through this examination.
Exams Duration:
Paper-1: 2 hours
(120 minutes) Morning Shift
Paper-2: 3 hours
(180 minutes) Afternoon Shift
Name of Paper |
Marks |
[Paper-1]
General Studies and Engineering Aptitude Paper |
200 |
[Paper-2] Engineering
Discipline [Civil Engineering] |
300 |
Total [Paper-1 +
Paper-2] |
500 |
Negative Marking: There
will be penalty (Negative Marking) for wrong answers marked by a candidate in
the objective type question papers.
1. There
are four alternative for the answers to every question. For each question for
which a wrong answer has been given by the candidate, one-third (1/3rd) of the
marks assigned to that question will be deducted as penalty.
2. If a
candidate gives more than one answer, it will be treated as a wrong answer even
if one of the given answers happen to be correct and there will be same penalty
as above for that question.
3. If a
question is left blank i.e. no answer is given by the candidate, there will be
no penalty for that question.
IES Exam Civil Pattern Stage-2:
(Main/Phase-2)
Mains Examination has consisted with
two papers (Paper-1 & Paper-2). Only
candidates who clear the IES Preliminary exam will be able to appear in the IES
Mains exam. The Engineering Services (Main/Phase-II) examination will consist
of two conventional type papers in engineering discipline with a duration of
three hours and a maximum of 600 marks (300 marks in
each paper).
Exams Duration:
Paper-1: 3 hours
(180 minutes) Morning Shift
Paper-2: 3 hours
(180 minutes) Afternoon Shift
Name of Paper |
Marks |
[Paper-1]
Engineering Discipline-specific Paper-1 [Civil
Engineering] |
300 |
[Paper-2]
Engineering Discipline-specific Paper-2 [Civil
Engineering] |
300 |
Total [Paper-1 +
Paper-2] |
600 |
IES Best Books:
·
Best
Book For IES 2023 Civil Engineering (EE) Branch
IES Exam Civil Pattern Stage-3:
Personality Test Interview
Candidates who qualify for Stage – I
+ Stage – II Exam will be selected for Stage-3: Personality
Test Interview. Stage-III will consist of a personality test of 200 marks.
Name of Paper |
Marks |
Personality Test
& Personal Interview |
200 |
Total |
200 |
IES Previous Year
Papers:
·
[12
Years] IES Civil Engineering Previous Year Question Papers PDF Download
·
UPSC
IES/ESE Previous & Expected Year Cut-Offs All Engineering Branches
Detailed IES
Syllabus for Civil Engineering -
Stage-1 (Pre) & Stage-2 (Mains)
The standard of the paper in General
Studies and Engineering Aptitude (Preliminary Phase-I Examination) will be such
as can be expected from an Engineering or Science graduate. The level of papers
in other subjects will be almost the same as that of the engineering degree
examinations of an Indian university. There will be no practical tests for any
subject.
IES General Studies and Engineering Aptitude Syllabus 2023 [Common for All Branches]
Preliminary exam Paper-1 of the UPSC
IES will be of 200 marks and will be the same for all engineering branches. In
this paper, questions will be asked from the General Studies and Engineering
Aptitude papers. You can download the IES General Studies and Engineering
Aptitude Syllabus 2023 from the table given below.
1. Current issues of national and
international importance relating to social, economic and industrial
development
2. Engineering Aptitude covering
Logical reasoning and Analytical ability
3. Engineering Mathematics and
Numerical Analysis
4. General Principles of Design,
Drawing, Importance of Safety
5. Standards and Quality practices
in production, construction, maintenance and services
6. Basics of Energy and Environment:
Conservation, environmental pollution and degradation, Climate Change, Environmental
impact assessment
7. Basics of Project Management
8. Basics of Material Science and
Engineering
9. Information and Communication
Technologies (ICT) based tools and their applications in Engineering such as
networking, e-governance and technology-based education.
10. Ethics and values in Engineering
profession.
General Studies and
Engineering Aptitude Paper Analysis of ESE 2022 Preliminary
Examination
Subject |
No Of Question |
Current issues of
national and international importance |
14 |
Reasoning &
Aptitude |
13 |
Engineering
Mathematics and Numerical Analysis |
14 |
General
Principles of Design, Drawing, Importance of Safety |
7 |
Standards and
Quality Practices in Production |
8 |
Basics of Energy
and Environment |
8 |
Basics of Project
Management |
7 |
Basics of
Material Science and Engineering |
6 |
Information and
Communication Technologies (ICT) |
11 |
Ethics and values
in Engineering profession |
12 |
SSC JE Study
Material:
·
SSC JE Exam Pattern,
Syllabus, Best Books, Previous Papers, Notes Download
Note: The
paper in General Studies and Engineering Aptitude will include Knowledge of
relevant topics as may be expected from an engineering graduate, without
special study. Questions from all the 10 topics mentioned above shall be set.
Marks for each Topic may range from 5% to 15% of the total marks in the paper.
IES Civil Engineering Syllabus PDF Download
Contents for syllabi of both the Papers together for Preliminary Examination/ Stage-I (objective type Paper-II) and separately for Main/ Stage-II Examination (Conventional type Paper-I and Paper-II).
Civil Engineering Paper Analysis of ESE 2022 Preliminary Examination
Subject |
No Of Question |
Building
Materials |
12 |
Strength of
Materials |
19 |
Structural
Analysis |
09 |
Design of Steel
Structures |
10 |
RCC &
Prestress Concrete |
15 |
Construction
Practice, Planning &
Management |
12 |
Fluid &
Hydraulic Machines + OCF |
13 |
Engineering
Hydrology |
02 |
Irrigation
Engineering |
08 |
Environmental
Engineering |
14 |
Geo-technical
Engineering |
13 |
Surveying and
Geology |
12 |
Transportation
Engineering (Highway, Tunnel,
Railway Engg.) |
11 |
IES Syllabus for Civil Engineering Paper 1
1. Building
Materials:
Stone, Lime, Glass, Plastics, Steel,
FRP, Ceramics, Aluminum, Fly Ash, Basic Admixtures, Timber, Bricks and
Aggregates: Classification, properties and selection criteria;Cement: Types,
Composition, Properties, Uses, Specifications and various Tests; Lime &
Cement Mortars and Concrete: Properties and various Tests; Design of Concrete
Mixes: Proportioning of aggregates and methods of mix design.
2. Solid Mechanics:
Elastic constants, Stress, plane
stress, Strains, plane strain, Mohr’s circle of stress and strain, Elastic
theories of failure, Principal Stresses, Bending, Shear and Torsion.
3. Structural
Analysis:
Basics of strength of materials,
Types of stresses and strains, Bending moments and shear force, concept of
bending and shear stresses; Analysis of determinate and indeterminate
structures; Trusses, beams, plane frames; Rolling loads, Influence Lines, Unit
load method & other methods; Free and Forced vibrations of single degree
and multi degree freedom system; Suspended Cables; Concepts and use of Computer
Aided Design.
4. Design of Steel
Structures:
Principles of Working Stress
methods, Design of tension and compression members, Design of beams and beam
column connections, built-up sections, Girders, Industrial roofs, Principles of
Ultimate load design.
5. Design of
Concrete and Masonry structures:
Limit state design for bending,
shear, axial compression and combined forces; Design of beams, Slabs, Lintels,
Foundations, Retaining walls, Tanks, Staircases; Principles of pre-stressed
concrete design including materials and methods; Earthquake resistant design of
structures; Design of Masonry Structure.
6. Construction
Practice, Planning and Management:
Construction - Planning, Equipment,
Site investigation and Management including Estimation with latest project
management tools and network analysis for different Types of works; Analysis of
Rates of various types of works; Tendering Process and Contract Management,
Quality Control, Productivity, Operation Cost; Land acquisition; Labour safety
and welfare.
GATE Study
Material:
·
GATE Exam Pattern,
Syllabus, Best Books, Previous Papers, Notes Download
IES Syllabus for Civil Engineering Paper 2
1. Flow of Fluids,
Hydraulic Machines and Hydro Power:
(a) Fluid Mechanics, Open Channel
Flow, Pipe Flow: Fluid properties; Dimensional Analysis and Modeling; Fluid
dynamics including flow kinematics and measurements; Flow net; Viscosity,
Boundary layer and control, Drag, Lift, Principles in open channel flow, Flow
controls. Hydraulic jump; Surges; Pipe networks.
(b) Hydraulic Machines and Hydro
power - Various pumps, Air vessels, Hydraulic turbines – types, classifications
& performance parameters; Power house – classification and layout, storage,
pondage, control of supply.
2. Hydrology and
Water Resources Engineering:
Hydrological cycle, Ground water
hydrology, Well hydrology and related data analysis; Streams and their gauging;
River morphology; Flood, drought and their management; Capacity of Reservoirs.
Water Resources Engineering : Multipurpose uses of Water, River basins and
their potential; Irrigation systems, water demand assessment; Resources -
storages and their yields; Water logging, canal and drainage design, Gravity
dams, falls, weirs, Energy dissipaters, barrage Distribution works, Cross
drainage works and head-works and their design; Concepts in canal design,
construction & maintenance; River training, measurement and analysis of rainfall.
3. Environmental
Engineering:
(a) Water Supply Engineering:
Sources, Estimation, quality standards and testing of water and their
treatment; Rural, Institutional and industrial water supply; Physical, chemical
and biological characteristics and sources of water, Pollutants in water and
its effects, Estimation of water demand; Drinking water Standards, Water
Treatment Plants, Water distribution networks.
(b) Waste Water Engineering:
Planning & design of domestic waste water, sewage collection and disposal;
Plumbing Systems. Components and layout of sewerage system; Planning &
design of Domestic Waste-water disposal system; Sludge management including
treatment, disposal and re-use of treated effluents; Industrial waste waters
and Effluent Treatment Plants including institutional and industrial sewage
management.
(c) Solid Waste Management: Sources
& classification of solid wastes along with planning & design of its
management system; Disposal system, Beneficial aspects of wastes and
Utilization by Civil Engineers.
(d) Air, Noise pollution and
Ecology: Concepts & general methodology.
4. Geo-technical
Engineering and Foundation Engineering :
(a) Geo-technical Engineering : Soil
exploration - planning & methods, Properties of soil, classification,
various tests and inter-relationships; Permeability & Seepage,
Compressibility, consolidation and Shearing resistance, Earth pressure theories
and stress distribution in soil; Properties and uses of geo-synthetics.
(b) Foundation Engineering: Types of
foundations & selection criteria, bearing capacity, settlement analysis,
design and testing of shallow & deep foundations; Slope stability analysis,
Earthen embankments, Dams and Earth retaining structures: types, analysis and
design, Principles of ground modifications.
5. Surveying and
Geology:
(a) Surveying: Classification of
surveys, various methodologies, instruments & analysis of measurement of
distances, elevation and directions; Field astronomy, Global Positioning
System; Map preparation; Photogrammetry; Remote sensing concepts; Survey Layout
for culverts, canals, bridges, road/railway alignment and buildings, Setting
out of Curves.
(b) Geology: Basic knowledge of
Engineering geology & its application in projects.
6. Transportation
Engineering:
Highways - Planning &
construction methodology, Alignment and geometric design; Traffic Surveys and
Controls; Principles of Flexible and Rigid pavements design. Tunneling -
Alignment, methods of construction, disposal of muck, drainage, lighting and
ventilation. Railways Systems – Terminology, Planning, designs and maintenance
practices; track modernization. Harbours – Terminology, layouts and planning.
Airports – Layout, planning & design.
Download PDF IES Syllabus 2023 for the Civil Engineering (CE)
In the table below,
we have shared with you the IES Civil Engineering Syllabus in PDF. You can
download the official IES Civil Syllabus or you can download the IES Civil
Syllabus PDF given in this article.
Syllabus Name |
PDF Link |
IES Syllabus 2023 for the Civil Engineering (CE) PDF Download |
|
[Official] IES Syllabus 2023 for the Civil Engineering (CE)
PDF |
|
[Official] IES General Studies and Engineering Aptitude Syllabus 2023
[Common for All Branches] |
IES Exam Notes PDF:
·
Civil
Engineering Notes Pdf For GATE, IES, PSUs
Conclusion
I hope you have thoroughly
understood the IES Syllabus and Exam Pattern for Civil
Engineering 2023. We have shared the IES Syllabus for Civil Engineering (CE) along with subject-wise weightage. If
the previous year's papers of the syllabus are analysed, most of the questions
are asked about Strength of Materials, RCC & Prestress Concrete,
Environmental Engineering, Geo-technical Engineering and general aptitude.
Whenever you study for the IES exam,
always focus more on the topic on which more questions are asked. Always do
your preparation according to the IES syllabus.
IES 2023 Civil Engineering Syllabus & Exam Pattern:
Frequently Asked Questions
Here below we are sharing with you
the frequently asked questions and answers for the IES 2023 Civil Engineering Syllabus and Exam Pattern. Apart from these, if
you have any other queries for the upcoming exam, you can ask us by commenting.
Where to Download IES 2023 Civil Engineering Syllabus PDF?
UPSC has released the official IES 2023 syllabus on its website. Also, you can download our IES Syllabus for Civil Engineering (CE) with subject wise weightage in PDF.
What are the most important topics for IES 2023 Civil Engineering?
If you analyse the IES previous year's papers, you will find that most of the questions have been asked of you in the subjects of Strength of Materials, RCC & Prestress Concrete, Environmental Engineering, Geo-technical Engineering. You need to pay maximum attention to these subjects.
Comment Below, Ask Anything About This Article...:)