GATE Syllabus 2023 for Civil Engineering [CE] PDF Download

GATE Syllabus 2023 for Civil Engineering

In this article we are sharing with you the GATE Syllabus 2023 for the Civil Engineering [CE] branch. If you want to pass the GATE Exam 2023, then you have to prepare according to the GATE Civil Engineering Syllabus 2023. In the GATE exam, you will be asked 10 questions on General Aptitude (GA) and 55 questions on the candidate's selected subject (Civil Engineering). In this paper you will be asked 65 questions, which will be worth 100 marks. Below we are providing you with the GATE Syllabus for Civil Engineering [CE] whose PDF you can also download.

GATE Latest News:

·         GATE Notification 2023: Check Exam Dates, Admit Card, Result

The Graduate Aptitude Test in Engineering (GATE) exam is conducted every year at the national level. This exam is conducted every year by IISc Bangalore and any one of the seven IITs. This year, in 2023, this exam will be conducted by the Indian Institute of Technology, Kanpur.

(toc)

Gate Syllabus & Exams Pattern for Civil Engineering 2023

Gate 2023 exam is conducted in online mode at select centres in select cities across the country. In the GATE exam, you are asked Multiple Choice Questions (MCQ), Multiple Selected Questions (MSQ), and Numerical Answer Type (NAT) questions from General Aptitude (GA) and the selected subject of the candidate. Below, we are sharing with you the GATE Exam Syllabus and Exam Pattern for the Civil Engineering Branch.

GATE 2023 Study Material:

·         GATE 2023 Exam Pattern, Syllabus, Best Books, Previous Papers, Notes Download

Gate Exam Pattern for Civil Engineering [CE]

In the GATE 2023 exam, you will be asked questions about General Aptitude (GA) and the selected subject (Civil Engineering ) of the candidate. A total of 65 questions will be asked in the GATE 2023 exam paper, out of which 10 questions will be from General Aptitude (GA) and 55 questions from the Civil Engineering and Engineering Mathematics subject. The GATE Exam 2023 will consist of General Ability 15 Marks, Engineering Mathematics 13 Marks, and Civil Engineering Subject 72 Marks, and the complete paper will be of 100 marks. The GATE Civil Engineering exam will be of 3-hour duration. The questions in the GATE exam will be worth one or two marks.

Duration & Timing Exam: 3 hours [180 minutes] in duration.

Subjects	Questions/Marks
General Aptitude (GA)	10/15
Civil Engineering [CE] + Engineering Mathematics	55/85
Total	65/100

GATE Best Books:

·         Best Book For GATE 2023 Civil Engineering (CE) Branch

Negative Marking:

There will be negative marking for the wrong answer chosen in the MCQs. For 1-mark MCQs, 1/3 of a mark will be deducted for each wrong answer. Similarly, for 2-mark MCQs, 2/3 marks will be deducted for wrong answers. There is no negative marking for wrong answers to an MSQ or NAT question.

GATE General Aptitude (GA) Syllabus 2023 [Common for All Paper Branch]

GATE General Aptitude (GA) is made up of four sections. In General Aptitude, questions will be asked from 4 sections: Verbal Aptitude, Quantitative Aptitude, Analytical Aptitude, and Spatial Aptitude. 10 questions will be asked from General Aptitude (GA), which will be of 15 marks. The general aptitude syllabus is the same for all branch papers. You can download the Civil Engineering Syllabus PDF with General Aptitude (GA) from the table given below.

Verbal Aptitude:

Basic English grammar: tenses, articles, adjectives, prepositions, conjunctions, verb-noun agreement, and other parts of speech Basic vocabulary: words, idioms, and phrases in context Reading and comprehension Narrative sequencing 

Quantitative Aptitude:

Data interpretation: data graphs (bar graphs, pie charts, and other graphs representing data), 2-and 3-dimensional plots, maps, and tables Numerical computation and estimation: ratios, percentages, powers, exponents and logarithms, permutations and combinations, and series Mensuration and geometry Elementary statistics and probability

Analytical Aptitude

Logic: deduction and induction, Analogy, Numerical relations and reasoning.

Spatial Aptitude

Transformation of shapes: translation, rotation, scaling, mirroring, assembling, and grouping Paper folding, cutting, and patterns in 2 and 3 dimensions.

GATE Syllabus for Civil Engineering [CE] PDF Download

GATE is a tough exam. Every year, lakhs of students in the Civil Engineering branch apply online for this exam. Only a few of them are able to clear this exam. Cracking the GATE exam requires good time management and hard work. The syllabus of the GATE Civil Engineering  branch is huge and tough too. You have to prepare for the GATE exam according to its syllabus. Here below we are sharing with you the GATE Syllabus for Civil Engineering [CE] with subject-wise weightage.

GATE Previous Year Papers:

·         [21 Years] GATE Civil Engineering Previous Year Question Papers PDF Download

·         GATE Cut Off Previous and Expected Year All Engineering Branch

Note: The gate mark weightage has been mentioned in percentage for the mentioned years. (alert-warning)

Section 1: Engineering Mathematics Gate 2023 Syllabus PDF

Linear Algebra: Matrix algebra; Systems of linear equations; Eigen values and Eigen vectors.

Calculus: Functions of single variable; Limit, continuity and differentiability; Mean value theorems, local maxima and minima; Taylor series; Evaluation of definite and indefinite integrals, application of definite integral to obtain area and volume; Partial derivatives; Total derivative; Gradient, Divergence and Curl, Vector identities; Directional derivatives; Line, Surface and Volume integrals.

Ordinary Differential Equation (ODE): First order (linear and non-linear) equations; higher order linear equations with constant coefficients; Euler-Cauchy equations; initial and boundary value problems.

Partial Differential Equation (PDE): Fourier series; separation of variables; solutions of one-dimensional diffusion equation; first and second order one-dimensional wave equation and two-dimensional Laplace equation.

Probability and Statistics: Sampling theorems; Conditional probability; Descriptive statistics – Mean, median, mode and standard deviation; Random Variables – Discrete and Continuous, Poisson and Normal Distribution; Linear regression. 

Numerical Methods: Error analysis. Numerical solutions of linear and non-linear algebraic equations; Newton’s and Lagrange polynomials; numerical differentiation; Integration by trapezoidal and Simpson’s rule; Single and multi-step methods for first order differential equations.

Engineering Mathematics	Marks Weightage [%]
2022	13
2021	11
2020	11.5
2019	10.5
2018	11.5

Section 2: Structural Engineering Gate 2023 Syllabus PDF

Engineering Mechanics: System of forces, free-body diagrams, equilibrium equations; Internalforces in structures; Frictions and its applications; Centre of mass; Free Vibrations of undamped SDOF system.

Engineering Mechanics	Marks Weightage [%]
2022	1
2021	0
2020	1
2019	0.5
2018	3

Solid Mechanics: Bending moment and shear force in statically determinate beams; Simple stress and strain relationships; Simple bending theory, flexural and shear stresses, shear centre; Uniform torsion, Transformation of stress; buckling of column, combined and direct bending stresses.

Solid Mechanics	Marks Weightage [%]
2022	2
2021	2
2020	4
2019	3.5
2018	6

Structural Analysis: Statically determinate and indeterminate structures by force/ energy methods; Method of superposition; Analysis of trusses, arches, beams, cables and frames; Displacement methods: Slope deflection and moment distribution methods; Influence lines; Stiffness and flexibility methods of structural analysis.

Structural Analysis	Marks Weightage [%]
2022	8
2021	6
2020	6
2019	4.5
2018	1.5

Construction Materials and Management: Construction Materials: Structural Steel – Composition, material properties and behaviour; Concrete - Constituents, mix design, short-term and long-term properties. Construction Management: Types of construction projects; Project planning and network analysis - PERT and CPM; Cost estimation.

Construction Materials and Management	Marks Weightage [%]
2022	3
2021	1
2020	0.5
2019	1
2018	0.5

Concrete Structures: Working stress and Limit state design concepts; Design of beams, slabs, columns; Bond and development length; Prestressed concrete beams.

R. C. C.	Marks Weightage [%]
2022	5
2021	5
2020	5
2019	5
2018	7

Steel Structures: Working stress and Limit state design concepts; Design of tension and compression members, beams and beam- columns, column bases; Connections - simple and eccentric, beam-column connections, plate girders and trusses; Concept of plastic analysis -beams and frames.

Steel Structures	Marks Weightage [%]
2022	2
2021	3
2020	2.5
2019	5
2018	4.5

Section 3: Geotechnical Engineering Gate 2023 Syllabus PDF

Soil Mechanics: Three-phase system and phase relationships, index properties; Unified and Indian standard soil classification system; Permeability - one dimensional flow, Seepage through soils – two - dimensional flow, flow nets, uplift pressure, piping, capillarity, seepage force; Principle of effective stress and quicksand condition; Compaction of soils; One- dimensional consolidation, time rate of consolidation; Shear Strength, Mohr’s circle, effective and total shear strength parameters, Stress-Strain characteristics of clays and sand; Stress paths.

Foundation Engineering: Sub-surface investigations - Drilling bore holes, sampling, plate load test, standard penetration and cone penetration tests; Earth pressure theories - Rankine and Coulomb; Stability of slopes – Finite and infinite slopes, Bishop’s method; Stress distribution in soils – Boussinesq’s theory; Pressure bulbs, Shallow foundations – Terzaghi’s and Meyerhoff’s bearing capacity theories, effect of water table; Combined footing and raft foundation; Contact pressure; Settlement analysis in sands and clays; Deep foundations – dynamic and static formulae, Axial load capacity of piles in sands and clays, pile load test, pile under lateral loading, pile group efficiency, negative skin friction.

Geotechnical Engineering	Marks Weightage [%]
2022	13
2021	15
2020	14.5
2019	16
2018	14

Section 4: Water Resources Engineering Gate 2023 Syllabus PDF

Fluid Mechanics: Properties of fluids, fluid statics; Continuity, momentum and energy equations and their applications; Potential flow, Laminar and turbulent flow; Flow in pipes, pipe networks; Concept of boundary layer and its growth; Concept of lift and drag.

Fluid Mechanics	Marks Weightage [%]
2022	9
2021	8
2020	7.5
2019	9
2018	8.5

Hydraulics: Forces on immersed bodies; Flow measurement in channels and pipes; Dimensional analysis and hydraulic similitude; Channel Hydraulics - Energy-depth relationships, specific energy, critical flow, hydraulic jump, uniform flow, gradually varied flow and water surface profiles.

Hydrology: Hydrologic cycle, precipitation, evaporation, evapo-transpiration, watershed, infiltration, unit hydrographs, hydrograph analysis, reservoir capacity, flood estimation and routing, surface run-off models, ground water hydrology - steady state well hydraulics and aquifers; Application of Darcy’s Law.

Irrigation: Types of irrigation systems and methods; Crop water requirements - Duty, delta, evapotranspiration; Gravity Dams and Spillways; Lined and unlined canals, Design of weirs on permeable foundation; cross drainage structures.

Irrigation and Hydrology	Marks Weightage [%]
2022	3
2021	4
2020	5.5
2019	5.5
2018	5

Section 5: Environmental Engineering Gate 2023 Syllabus PDF

Water and Waste Water Quality and Treatment: Basics of water quality standards – Physical, chemical and biological parameters; Water quality index; Unit processes and operations; Water requirement; Water distribution system; Drinking water treatment.

Sewerage system design, quantity of domestic wastewater, primary and secondary treatment. Effluent discharge standards; Sludge disposal; Reuse of treated sewage for different applications.

Air Pollution: Types of pollutants, their sources and impacts, air pollution control, air quality standards, Air quality Index and limits.

Municipal Solid Wastes: Characteristics, generation, collection and transportation of solid wastes, engineered systems for solid waste management (reuse/ recycle, energy recovery, treatment and disposal).

Environmental Engineering	Marks Weightage [%]
2022	10
2021	11
2020	11
2019	9
2018	10

Section 6: Transportation Engineering

Transportation Infrastructure: Geometric design of highways - cross-sectional elements, sight distances, horizontal and vertical alignments.

Geometric design of railway Track – Speed and Cant.

Concept of airport runway length, calculations and corrections; taxiway and exit taxiway design.

Highway Pavements: Highway materials - desirable properties and tests; Desirable properties of bituminous paving mixes; Design factors for flexible and rigid pavements; Design of flexible and rigid pavement using IRC codes

Traffic Engineering: Traffic studies on flow and speed, peak hour factor, accident study, statistical analysis of traffic data; Microscopic and macroscopic parameters of traffic flow, fundamental relationships; Traffic signs; Signal design by Webster’s method; Types of intersections; Highway capacity.

Transportation Engineering	Marks Weightage [%]
2022	7
2021	9
2020	11
2019	9.5
2018	9.5

Section 7: Geomatics Engineering Gate 2023 Syllabus PDF

Principles of surveying; Errors and their adjustment; Maps - scale, coordinate system; Distance and angle measurement - Levelling and trigonometric levelling; Traversing and triangulation survey; Total station; Horizontal and vertical curves. Photogrammetry and Remote Sensing - Scale, flying height; Basics of remote sensing and GIS.

Geomatics Engineering	Marks Weightage [%]
2022	8
2021	5
2020	14.5
2019	6
2018	4

Download PDF GATE Syllabus 2023 for the Civil Engineering

In the table below, we have shared with you the GATE Civil Engineering Syllabus in PDF. You can download the official GATE Civil Engineering Syllabus or you can download the GATE Civil Engineering Syllabus subject wise weightage PDF given in this article.

Syllabus Name	PDF Link
GATE Syllabus 2023 for the Civil Engineering PDF Download	Download PDF
[Official] GATE Syllabus 2023 for the Civil Engineering PDF	Download PDF
[Official] GATE General Aptitude (GA) Syllabus 2023 [Common for All Paper Branch]	Download PDF

GATE Exam Notes PDF:

·         Civil Engineering Notes Pdf For GATE, IES, PSUs

Conclusion

I hope you have understood the GATE Syllabus and Exam Pattern for Civil Engineering [CE] 2023. We have shared the GATE Syllabus for Civil Engineering along with subject-wise weightage. If the previous year's papers of the syllabus are analysed, most of the questions are asked about Geotechnical Engineering, Environmental Engineering, Transportation Engineering, engineering mathematics, and general aptitude.

Whenever you study for the GATE exam, always focus more on the topic on which more questions are asked. Always do your preparation according to the GATE syllabus.

GATE 2023 Civil Engineering [CE] Syllabus & Exam Pattern: Frequently Asked Questions

Here below we are sharing with you the frequently asked questions and answers for the GATE 2023 Civil Engineering [CE] Syllabus and Exam Pattern. Apart from these, if you have any other queries for the upcoming exam, you can ask us by commenting.

Where to Download GATE 2023 Civil Engineering [CE] Syllabus PDF?

IIT has released the official syllabus on its website. Also, you can download our GATE Syllabus for Civil Engineering [CE] with subject wise weightage in PDF.

How many questions will be asked in Civil Engineering [CE]?

In GATE 2023 Civil Engineering [CE] , you will be asked 65 questions, which will be worth 100 marks. In this paper, you will be asked questions about General Aptitude (GA), Civil Engineering, and Engineering Mathematics.

What is the difference between NAT and MCQ questions in the GATE 2023 Civil Engineering exam?

In MCQ questions, there are 4 options to choose from, whereas in NAT questions there is no option to choose from.

What are the most important topics for GATE 2023 Civil Engineering?

If you analyse the previous year's papers, you will find that most of the questions have been asked of you in the subjects of Programming & Data Structure, Geotechnical Engineering, Environmental Engineering, Transportation Engineering, engineering mathematics, and general aptitude. You need to pay maximum attention to these subjects.